Pearland Drywall Repair Pros
Drywall Patching & Hole Repair in Pearland, TX
Drywall patching and hole repair in Pearland with texture matching and paint-ready finishes. Free estimates, no job too small.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Pearland and nearby communities.
A doorknob punched through the hallway wall or a moving day dent nobody wants to look at, it happens. Small holes are the most common call Pearland Drywall Repair Pros gets, and they're also the easiest job to botch with a tube of spackle from the hardware store. A clean patch means cutting the damage back to solid board, backing it properly, and matching the texture so the wall reads flat once it's painted.
Clay soil movement around Pearland also causes seam and corner cracks that look like simple holes at first glance but need the same careful patching, sometimes with a little extra reinforcement so the crack doesn't come right back.
What's included
What's Included in a Patch Job
Typically included Optional Customer prep
- Cutting out damaged drywall and squaring the opening
- Backing support (cleats or a patch panel) so the repair holds
- Tape, mud, sand, and texture match to the surrounding wall
- Paint touch-up after texture cures
- Multiple patches bundled into one visit for a lower per-hole rate
- Clear furniture or wall hangings near the repair area
- Point out any other small holes while we're already on site
Want a clearer scope?
Get a Free EstimateHow it works
How We Patch and Match
Step 1Assessment
Check the hole size, backing condition, and existing texture pattern.
Step 2Cutout and backing
Square the damage and install a backing cleat or patch panel.
Step 3Tape and first mud coat
Bed the seams and let the compound set.
Step 4Second and third coats
Feather each layer wider for a flat, invisible transition.
Step 5Sand smooth
Knock down high spots before texture goes on.
Step 6Texture match
Knockdown, orange peel, or smooth to match what's already there.
Step 7Final inspection
Check the patch under raking light before we call it done.
Step 8Paint-ready handoff
Surface is ready for your paint or ours if bundled.
Materials
Materials Used for Clean Patches
Good materials are half the reason a patch disappears instead of standing out.
Setting-type joint compound
Hardens chemically instead of just drying, so it resists cracking as the house settles.
Fiberglass mesh tape
Flexes with minor seasonal movement better than paper tape on smaller patches.
Sized drywall patch panels
Cut to match the exact stud bay or backing, not a generic kit square.
Questions on materials?
Get a Free EstimateCost
What Does a Drywall Patching & Hole Repair Cost in Pearland?
Costs come down to hole size, number of spots, and how tricky the texture match is. Get a free estimate and we'll give you a real number for your walls, not a guess over the phone.
| Project type | Typical range | What’s included |
|---|---|---|
| Single small hole | $150–$300 | nail hole or doorknob dent, texture matched, paint-ready. |
| Larger hole (fist-sized or bigger) | $250–$500 | backing panel, multi-coat mud, texture blend. |
| Multiple patches, one visit | $400–$900 | several spots across a room or hallway. |
| Patch plus paint touch-up | $75–$200 | Add — depending on paint sheen and wall size. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateTimeline
How Long a Patch Takes to Dry and Cure
Most patch jobs move fast, but mud needs real time to set up right. Gulf Coast humidity can slow drying between coats, so we build a little cushion into the schedule rather than rush a wet patch.
- 01
Assessment and cutout
same day.
- 02
First mud coat
same dayseveral hours to set.
- 03
Second and third coats
1–2 dayseach coat needs to dry before the next.
- 04
Texture and sand
same dayonce final coat is dry.
- 05
Paint-ready
next day.
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits for Small Drywall Patches
Rules vary by city and county, so double check with your local building department if you're unsure. Most patch calls we get don't need paperwork at all.
| Typically needs a permit | Often no permit |
|---|---|
| Structural wall repair tied to load-bearing framing | A single hole or nail-pop patch |
| Multi-room drywall replacement bundled with larger renovation work | Small seam or corner crack repair |
| — | Texture matching on an existing wall |
Need help with permits?
Get a Free EstimateDrywall Patching & Hole Repair
Patch It Yourself or Call a Pro?
- One small nail hole from a picture frame
- A minor dent on a flat, unpainted wall you're repainting anyway
- Spackle touch-ups where texture isn't a factor
- Holes larger than a few inches or near a corner
- Repairs on knockdown, orange peel, or popcorn textured walls
- Recurring cracks in the same spot, which usually means settling, not a one-time ding
Questions about this?
Get a Free EstimateBefore & after
Before & After Patch Results
Before 
After
When to call
When to Call for a Patch Instead of Waiting
- The hole keeps growing or crumbling at the edges
- You've got more than two or three spots needing attention
- A previous DIY patch is bulging or cracked
- The wall feels soft, which could mean something's going on behind it
Seeing warning signs?
Get a Free EstimateDrywall Patching & Hole Repair
Patch & Hole Repair Questions
How much does it cost to patch a hole in drywall in Pearland? Small holes typically run $150–$300 with texture matching included. Larger holes or multiple patches cost more, and a free estimate gets you an exact number.
Is it worth fixing nail pops myself or calling a pro? One isolated nail pop is fine to handle yourself with spackle. If you're seeing several across a wall or they keep coming back, that's usually settling and worth a professional look.
Do I need a permit to patch drywall in Texas? Most small patch jobs don't require a permit. Larger structural repairs or multi-room work tied to a bigger renovation might, so check with your local building department if you're not sure.
How long before I can paint over a patch? Once the final texture coat is dry, usually the next day, the surface is paint-ready. Humidity can add a little time to that.
Can you match my existing texture so the patch doesn't show? Yes. We sample the existing pattern, whether it's knockdown, orange peel, or smooth, and test the technique before applying it to your repair.
Questions about this?
Get a Free EstimateNext step
Get a Free Estimate on Your Patch
Got a hole, crack, or dented wall bugging you? Call Pearland Drywall Repair Pros at +1 (325) 422-1856 or request a free estimate. No job is too small to look at.
More services
Other Drywall Repair services
Sheetrock Repair
Sheetrock repair in Pearland covering section replacement, seam retaping, and texture matching. Free estimates, honest scope.
Texture Matching (Knockdown & Orange Peel)
Texture matching in Pearland for knockdown and orange peel finishes so patches disappear. Free estimates, no visible outlines.
Popcorn Ceiling Removal & Re-Texture
Popcorn ceiling removal and re-texture in Pearland with skim coat and knockdown or smooth finish. Free estimates, dust-managed process.
Ask about Drywall Patching & Hole Repair
Tell us about the project and how to reach you.